Windshield-washer fluid

Windshield-washer fluid reservoir

Fill the windshield-washer fluid reservoir periodically.

Fill the windshield-washer fluid reservoir periodically.

Add windshield-washer fluid when the low windshield-washer fluid warning light comes on.

To fill the windshield-washer fluid reservoir, lift the cap off the reservoir and pour the windshieldwasher fluid into the reservoir opening.

Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer’s instructions for the mixture ratio.

Refill the reservoir more frequently when driving conditions require an increased amount of windshield-washer fluid.

Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent.

CAUTION

● Do not substitute engine anti-freeze coolant for windshield-washer fluid.

This may result in damage to the paint.
● Do not fill the windshield-washer fluid reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshieldwasher fluid reservoir.
● Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the windshield-washer fluid reservoir.

Do not use the windshield-washer fluid reservoir to mix the washer fluid concentrate and water.

    See also:

    Electric power steering system
    - If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. - When the electric power steering warning lig ...

    General maintenance
    General maintenance includes those items which should be checked during normal dayto- day operation. They are essential for proper vehicle operation. It is your responsibility to perform these pro ...

    Rear-facing child restraint installation using the seat belts
    WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being p ...