Manual operation
Fan speed control
Turn the 
fan speed control dial
to manually
control the fan speed.
Press the AUTO button to return to automatic control of the fan speed.
Air recirculation
Press the 
air recirculation
button to recirculate
interior air inside the vehicle. The
indicator light on the button will come on.
The air recirculation cannot be activated when
the air conditioner is in 
the
front defrosting
mode or the 
front defrosting and
foot outlet
mode.
Automatic intake air control
In the AUTO mode, the intake air will be controlled
automatically. To manually control the intake
air, press the air recirculation
button.
To return to the automatic control mode, press
and hold the air recirculation
button for
about 2 seconds. The indicator light will flash
twice, and then the intake air will be controlled
automatically.
Air flow control
Pressing the MODE button manually controls air flow and selects the air outlet:
— Air flows from center and
side
vents.
— Air flows from center and side
vents
and foot outlets.
— Air flows mainly from foot
outlets.
— Air flows from defroster and
foot
outlets.
— Air flows from defroster
outlets.
To turn system off
Press the OFF button.
See also:
Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink® button.
Do not release the button until step 4
has been completed.
2. Wh ...
Console box
Upper half
Pull up on the driver’s side latch to open the
upper half of the console box.
The upper half of the console box may be used for
storage of cellular phones. An access hole is
prov ...
HomeLink® universal transceiver (Type B) (if so
equipped)
The Type B system can be identified by the IV 1
on the back of the mirror. Move the mirror to see
if the IV is present. If the IV is on the mirror, use the
procedure in this section to program th ...