Vehicle security system
The vehicle security system provides visual and audible alarm signals if someone opens the doors, trunk lid or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.
Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your NISSAN dealer may also offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features.
How to arm the vehicle security system
1. Close all windows. (The system can be
armed even if the windows are open.)
2. Remove the Intelligent Key from the vehicle.
3. Close all doors, hood and trunk/liftgate. Lock all doors. The doors can be
locked with
the Intelligent Key, door handle request
switch (if so equipped), power door lock
switch or mechanical key.
4. Confirm that the security indicator light
comes on. The security light stays on for
about 30 seconds. The vehicle security system
is now pre-armed. After about 30 seconds
the vehicle security system automatically
shifts into the armed phase. The
security light begins to flash once every
3 seconds. If, during the 30-second pre-arm
time period, the driver’s door is unlocked by
the key or the keyfob, or the ignition switch is
placed in the ACC or ON position, the system
will not arm.
● Even when the driver and/or passengers are in the vehicle, the system will activate with all the doors, hood and trunk lid locked with the ignition switch placed in the LOCK position.
When placing the ignition switch in the ACC or ON position, the system will be released.
Vehicle security system activation
The vehicle security system will give the following alarm:
● The headlights blink and the horn sounds
intermittently.
● The alarm automatically turns off after a period
of time. However, the alarm reactivates if
the vehicle is tampered with again. The alarm
can be shut off by unlocking the driver’s door
with the key, or by pressing the
button
on the Intelligent Key.
The alarm is activated by:
● opening the door or hood without using the key or Intelligent Key (even if the door is unlocked by releasing the door inside lock switch).
How to stop an activated alarm
The alarm stops only by unlocking the driver’s door or the trunk/liftgate with the key, pressing the button on the Intelligent Key, or pressing the request switch on the driver’s or passenger’s door with the Intelligent Key in range of the door handle.
See also:
Exterior front
1. Front view camera (if so equipped)
2. Engine hood
3. Windshield wiper and washer switch,
wiper blades
4. Windshield-washer fluid
5. Compass display (if so equipped)
6. Power windows
7. Do ...
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the
vehicle body underside can accelerate corrosion.
Wet floor coverings will not dry completely
inside the vehicle, and should be removed for
d ...
Spark plugs
Replacing spark plugs
Iridium-tipped spark plugs
It is not necessary to replace iridium-tipped A
spark plugs as frequently as conventional type
spark plugs because they last much longer. Follow
...