Automatic operation

Cooling and/or dehumidified heating (AUTO)

This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred temperature is set manually.

1. Push the “AUTO” button on. (The indicator on the button will illuminate and AUTO will be displayed.)
2. Operate the driver side temperature control buttons (type A) or dial (type B) to set the desired temperature.

Adjust the temperature to about 758F (248C) for normal operation.

The temperature of the passenger compartment will be maintained automatically.

Air flow distribution and fan speed will also be controlled automatically.

3. You can individually set driver and front passenger side temperature using each temperature control buttons (type A) or dial (type B). When the “DUAL” button is pushed or the passenger side temperature control buttons (type A) or dial (type B) is/are operated, the DUAL indicator will come on.

To turn off the passenger side temperature control, push the “DUAL” button.

A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Heating (A/C OFF)

The air conditioner does not activate in this mode. When you need to heat only, use this mode.

1. Push the “A/C” button. (The A/C indicator will turn off.)
2. Operate the temperature control buttons (type A) or dial (type B) to set the desired temperature.

The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.
Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly.
Not recommended if windows fog up.

Dehumidified defrosting or defogging

1. Push the “button. (The ” front defroster button. (The indicator light on the button will come on.)
2. Operate the temperature control buttons (type A) or dial (type B) to set the desired temperature.

To quickly remove ice from the outside of the windows, turn the “ control” fan speed control dial and set it to the maximum position.
As soon as possible after the windshield is clean, push the “AUTO” button to return to the auto mode.
When the “ pushed, the air conditioner will automatically” front defroster button is pushed, the air conditioner will automatically be turned on at outside temperatures above 238F (−58C) to defog the windshield, and the air recirculate mode will automatically be turned off.

Outside air is drawn into the passenger compartment to improve the defogging performance.

    See also:

    Push-button ignition switch operation
    When the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: • Push center once to change to ACC. • Push center two times to ch ...

    Electric operation
    Tilt or telescopic operation Move the lever to adjust the steering wheel up or down, forward or rearward to the desired position. Entry/Exit function operation: The automatic drive positioner s ...

    Troubleshooting guide
    Verify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent Key is in range or inside the vehicle, the vehicle system may respond differently than expect ...